Wavlink repeater setup requires a login at 192.168.10.1. The admin setup for WiFi repeaters is also accessible via http://192.168.10.1 login and 192.168.10.1 setup. It is possible to access the WiFi router's configuration page using this IP address.

August 10th, 2022

How to modify the 192.168.10.1 username and password?

Steps to Turn ON or OFF Password Protection on WiFi Extender Login via 192.168.10.1

In case 192.168.10.1 not working, then you can also use http//192.168.10.1. Wavlink repeater setup can also be accessed via 192.168.10.1 setup. To access 192.168.10.1 admin and Wifi repeater login, open any internet browser on your device. 192.168.10.1 is used to login into the Wi-Fi repeater admin setup. http//192.168.10.1 login can also be used to change the Wifi password and username. Password protection feature helps you in stopping unauthorized access to the user interface of the Netgear extender device. By default, this function of password protection is turned on. Still, you can also turn it off to access the admin interface without entering login details of Netgear Range Extender every time. Here, in this blog you will be informed regarding how to disable the password protection feature via 192.168.10.1login.

192.168.10.1 login | 192.168.10.1 Setup

Simple Steps to Turn Off Password Protection Feature on WiFi Extender Login

Follow the below instructions step by step to turn off the password protection feature on your WiFi Extender Login:

Step 1: Firstly, turn on your WiFi range extender.

Step 2: After that, turn on your computer or laptop.

Step 3: Now, connect your computer to the WiFi extender to a wired or wireless connection.

Step 4: In the next step, install any updated internet browser such as Mozilla Firefox, Google Chrome, Internet Explorer, or Microsoft Edge on your computer or laptop.

Step 5: Open the internet browser of your preference. Type 192.168.10.1 login in the address bar of the web browser. Click on the enter button.

Step 6: After that, enter the 192.168.10.1 username and password for login to the WiFi Extender Login page to set up your device.

Step 7: Once you login to your WiFi extender, go to the password settings.

Step 8: Choose the Password off option so that you can disable the password protection feature on your wireless Extender.

Step 9: At last, click on the Save button to apply all the changes made by you in the settings of your 192.168.10.1 login page.

Steps to Turn ON Password Protection Feature on WiFi Extender Login

The initial steps will remain the same as you used to disable the password protection on your WiFi Range Extender device. Now, look at the below instructions step by step to turn on the password protection feature on wireless Extender:

Step 1: Turn on your WiFi repeater.

Step 2: After that, power on your computer or laptop.

Step 3: In the next step, connect your laptop to Extender by establishing a wired or wireless connection.

Step 4: Now, install any updated internet browser of your choice on your computers, such as Mozilla Firefox, Google Chrome, Internet Explorer, or Microsoft Edge.

Step 5: Click on the New Extender Setup web page.

Step 6: After that, go to the password settings option and choose the Password ON option to enable the password protection feature on your Netgear WiFi Range Extender device.

Step 7: Click on the Save button to apply the changes made by you in the Netgear range extender device.

That's it. We hope that by following the above procedures, you will be able to successfully log in to your WiFi extender using the http://192.168.10.1 admin login page.

This blog post is actually just a Google Doc! Create your own blog with Google Docs, in less than a minute.